CVA™ Muzzleloader Firing Pin Set - 209 Primer - FIREKIT
by CVA
Replacement firing pin set for your 209 primer ignition
Comes with firing pin, spring, O-ring & retainer bushing
Original price
$10.00
-
Original price
$10.00
Original price
$10.00
$10.00
-
$10.00
Current price
$10.00
SKU FIREKIT
Description
The CVA Firing Pin Set is the optimum replacement for worn out or broken firing pins for Break–Action Muzzleloaders 2010 or newer. The set includes a Firing pin retainer-bushing, O-Ring for the firing pin retainer-bushing, Firing pin spring and 209 Firing pin. Fabricated especially for CVA Optima, Wolf and Accura Series Muzzleloaders, the CVA 209 Firing Pin Set also works well on other models 2010 or newer. Most break-action style Muzzleloaders contain a firing assembly that should be maintained at the same time you clean your breech plug. It is suggested this be done at the end of each shooting day in order to prevent undesired corrosion on or around your firing pin.
- Easy to replace and/or clean, use a proper fitting screwdriver to remove the firing pin bushing from the front of the breech face. The firing pin and firing spring will drop out of the frame when angled downward.
- Clean the firing pin, firing pin spring, firing pin bushing and firing pin recess thoroughly with a proper black powder cleaning solvent – Barrel Blaster Parts Soaker is recommended.
- Lube the pin and spring using cotton swabs and reinstall.
- Place the firing pin spring over the firing pin, then re-install the firing pin and tighten the firing pin bushing until flush with the frame.
- A light coating of breech plug grease on the bushing threads is a good practice to help maintain the functionality and longevity of your firing pin.
